|
GENERAL SPECIFICATION
THE QUICK STORE CONTAINER IS CONSTRUCTED WITH SPECIALLY DESIGNED PROFILED STEEL PANELS AND JOINTS, FORMING A MODULAR MONOCOQUE UNIT, EACH ELEMENT SUPPORTING AND STRENGTHENING THE OTHER. THIS GIVES MAXIMUM CAPACITY WITH LOW NET WEIGHT.
THE SIMPLE ASSEMBLY AND DISMANTLING PROCEDURE, TOGETHER WITH EASE OF TRANSPORT MAKE THE QUICK STORE A VERY VERSATILE STORAGE UNIT, EVEN FOR THOSE DIFFICULT TO REACH AREAS WHERE CONVENTIONAL STEEL CONTAINERS CANNOT BE PLACED.
FRAME SPECIFICATION
THE FRAME CONSISTS OF A STRONG BOX PROFILE, ROLLED FROM 2MM THICK GALVANISED STEEL. THIS PROFILE RUNS ACROSS THE ROOF, DOWN THE SIDES AND UNDER THE FLOOR, JOINED TOGETHER AT THE CORNER WITH BRACKETS, FORMING A STRONG FRAME.
FLOOR ELEMENT
THE FLOOR CONSISTS OF 35MM THICK FINE SAWN SOFTWOOD, TONGUE AND GROOVED BOARDING WITH EACH BOARD SECURELY FIXED TO THE FRAME RUNNING BENEATH. SECURELY FIXED ALONG BOTH EDGES OF THE FLOOR IS A GALVANISED STEEL TRIM, WHICH LOCATES THE SIDE WALLS. THE END OF THE FLOOR BOARDING ARE SECURED UNDER THE FRAME PROFILE.
WALL ELEMENT
WALL SECTIONS ARE CONSTRUCTED WITH O.75MM THICK GALVANISED PROFILED STEEL SHEETS, SECURELY FIXED ON THE FRAME. SIDE WALL SECTIONS FIT SNUGLY INTO THE FLOOR TRIM TO PREVENT THE INGRESS OF WATER. THE END PANEL LOCATES OVER THE FLOOR TRIM AND INTO GROOVES IN THE END OF THE SIDE SECTIONS TO FORM A WEATHER TIGHT JOINT. ON SIDE SECTIONS THE SHEET PROFILE IS HORIZONTAL, END SECTIONS THE SHEET PROFILE IS VERTICAL.
ROOF
THE ROOF SECTION IS CONSTRUCTED FROM THE SAME MATERIAL AND IN THE SAME WAY AS A SIDE SECTION. THE EDGES OF THE ROOF SECTION ARE GROOVED AND FIT OVER THE TOP EDGE OF THE SIDE SECTIONS TO FORM A WATER TIGHT JOINT. THE FRAME PROFILE AT EACH END FORMS A GUTTER SHEDDING WATER TO THE SIDES
|
